About C330M Cooled Infrared Detector
The Most Professional, Classical 320x256 / 30μm MWIR MCT Cooled
Infrared Detector
Product Description
C330M MWIR MCT cooled infrared detector comes with 320X256 format
at the pixel size of 30μm. It is interchangeable with most
mainstream MARS like products when configured with RS058 integrated
stirling cooler. It can be used for almost all possible
applications like long range surveillance system, handheld thermal
imagers, gas leakage detection cameras etc.
The dewar design, the cooler dimension, and the
mechanical/electrical interface are almost the same so that the
camera integrators only need to take out their old defective
counterpart and connect our interchangeable C330M RS058 easily for
further internal configuration.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30μm
- High Sensitivity
- Compact Design
- Lightweight
- Low Power Consumption
Product Specifications
| Model | C330M MW |
| Material | MCT |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Spectral Range | 3.7μm～4.8μm MW |
| Working Mode | Snapshot, ITR Integration Mode; Windows Mode; Anti-blooming |
| Charge Capacity | 36Me-/12Me- |
| Dynamic Range | ≥80dB |
| Number of Output | 1 or 4; Up to 6.6Mpixel/s per Output |
| NETD | F2: ≤9mK
F4: ≤15mK |
| Effective Pixel Rate | ≥99.5% |
| Response Non-uniformity | ≤8% |
| Cryocooler Type | RS058/RS046H |
| Steady Power Consumption | ≤6W @ RS058
≤6W @ RS046H |
| Max Power Consumption | ≤12W @ RS058
≤11W @ RS046H |
| Power Supply | RS058: 24V DC
RS046H: 32V DC |
| Cooling Time | ≤6min @ RS058
≤5min30s @ RS046H |
| Weight | ≤600g |
| Dimension (mm) | 142x58.5x71 |
| Working Temperature | -45°C ~ +71°C |
Industrial Applications
The C330M MWIR cryogenically cooled infrared detector is widely
used many areas such as Remote Monitoring System, Flight Vision
Enhancement System, Multi-sensor Payload etc.
About Global Sensor Technology
FAQs
1. How does uncooled focal plane array microbolometer work?
By using the principle of infrared radiant thermal effect, the
uncooled infrared detector converts infrared radiation energy into
heat energy with infrared absorption material, so that the
temperature of the sensitive material increases. Then, a certain
physical parameter of the sensitive material changes accordingly
and converts into electrical signal or visible light signal through
a certain conversion mechanism designed to realize the detection of
the object.
2. What's the advantage of uncooled vox microbolometer?
Uncooled infrared focal plane detector does not need an Integrated
Dewar Cooler Assembly (IDCA) device and can work at room
temperature. It has the advantages of fast start, low power
consumption, small size, light weight, long life, low cost and so
on. Although the sensitivity of uncooled infrared focal plane
detector is not as good as that of cooled infrared detectors, after
years of development, its cost performance has been obviously
better than the cooled detector, which has a broader application
prospect.
